SMARTMARE : PAD EDITOR v.1.0
Dead Horse Engineering · for the Dr. Sample SP-202
READY
USB
SP-202
BUS

CARD

Connect the card over USB, read it, write your changes. The SP-202 must be off.

Not connected.
Checks

    SAMPLE SET

    All your pads under one name (Drum Kit 01, Sample Pack…): banks C/D, the backup bank and the audio files waiting on pads.

    PADS

    Click a pad or press 1–8 to select and play it. Drag a pad onto another to copy it. Drop audio files on pads.

    INTERNAL · via BACKUP
    CARD
    MEMORY

    PAD

    What the SP-202 keeps for this pad.

    SOUND EDITOR

    Drag the S and E flags to set where the pad starts and ends. Wheel to zoom, drag to scroll.

    TRIM
    PLAY
    START
    END
    ZOOM
    GRADE
    FILE

    BACKUP BANK

    The SP-202's own BACKUP: banks A/B, kept inside the SP-202, copied to the card and back.

    1. SAVE on the SP-202 (internal → card): hold CANCEL, press BANK CARD C/D, pad 1, then REC. Wait until REC goes off.
    2. Edit A/B here: READ CARD, show bank A or B, copy pads into it, WRITE CARD.
    3. LOAD on the SP-202 (card → internal, replaces all of A/B): hold CANCEL, press BANK INT A/B, pad 1, then REC.

    BACKUP CARD

    Optional: a copy of the whole card (.img: banks C/D, the backup bank, everything) to keep or to put back.

    CARD TOOLS

    Update the card's firmware, or erase the whole card. The SP-202 must be off.

    FIRMWARE UPDATE

    Your pads and sample sets stay on the card. The SP-202 must be off.
    1. CHOOSE the new firmware (a .uf2 file). 2. CONNECT, then UPDATE: the card restarts in update mode and shows as a drive named RP2350. 3. COPY TO RP2350 and pick that drive: the card takes the new firmware and restarts with it. Then CONNECT again.

    no file chosen
    ERASE THE CARD

    A blank card: the pads of banks C/D, the BACKUP of banks A/B and every sample set are erased. Save what you want to keep first. Then format the card on the SP-202.

    LIVE LOG

    Everything the card says.

    Drop a .smartmare sample set or a .img card backup to open it · audio files and .sp202pad on a pad

    LOAD A SAMPLE SET

    The sample sets kept on the card. Open one, then press WRITE CARD to put its pads on the card. They are also files in the Sample Sets folder of the SMARTMARE drive: copy them to your computer to keep them, drop one on this page to open it.

    ON THE CARD