← Back DEMO Generic firmware: the Card Manager, the page the card brings for any gear. A demo card image is open: look at the checks, save it as a backup, open one of your own. Connecting a real card needs the page from the card itself.
SMARTMARE : CARD MANAGER v.1.0
Dead Horse Engineering · SmartMedia 4MB 5V emulator
READY
USB
SLOT
BUS

CARD

Connect the card over USB and read it. Take it out of the device, or switch the device off, first.

Not connected.
Checks

    BACKUP CARD

    A copy of the whole card, exactly as the device wrote it (.img), to keep or to put back.

    READ CARD to see what the card holds.

    CARD TOOLS

    Update the card's firmware, or erase the card. Out of the device.

    FIRMWARE UPDATE

    What the card holds stays on it.
    1. CHOOSE the new firmware (a .uf2 file). 2. CONNECT, then UPDATE: the card restarts in update mode and shows as a drive named RP2350. 3. COPY TO RP2350 and pick that drive: the card takes the new firmware and restarts with it. Then CONNECT again.

    no file chosen
    ERASE THE CARD

    A blank card, as from the factory: everything the device stored is erased. SAVE CARD BACKUP first to keep it. Then format the card in the device.

    LIVE LOG

    Everything the card says.

    Drop a .img card backup to open it